Your HK CAD logbook - where each hour goes
The Dashboard shows one Total time (for example 93:52). The HK CAD logbook has no total-time column: each hour goes under Day flying or Night flying, then under your role, and a grand total at the bottom adds them back up.
| Column (day / night) | Means | Filled from |
|---|---|---|
| (1) / (5) PI | Pilot in command (P1) | PIC time |
| (2) / (6) PI (U/S) | P1 under supervision | PICUS time |
| (3) / (7) P2/P2X | Co-pilot | SIC time plus P2X |
| (4) / (8) P/UT | Pilot under training | Dual received |
1. Open the PDF
Section titled “1. Open the PDF”- In Reports, tap the Export tab (Reports opens on Summary after the app starts). Check REPORT reads HK CAD and DATE RANGE is ALL.
- Tap Export at the top right. PDF Preview opens on the cover: “<your name>‘s Logbook”, the report name and the date range from your first flight to your last.
- Scroll down: the left page lists your flights; the right page below it holds the hours. Pinch to zoom in, then slide to the start of the page.
2. Day or night, then your role
Section titled “2. Day or night, then your role”- The top row is brought forward from the paper logbook: (1) 55:00 PI and (4) 30:00 P/UT. A carry-over with no night figure counts as all day.
- Each flight’s PIC time sits in its own row, under Day PI.
- A flight flown at night puts its time under Night flying (5) PI, for example 1:20. Night PI is the flight’s PIC night time, and Day PI is the rest.
3. The totals
Section titled “3. The totals”At the bottom of the page: (1) 62:32, (4) 30:00, (5) 01:20, and GRAND TOTAL COLUMN (1) TO (8): 93:52 HRS, the same as the Dashboard’s Total time. The two PI columns, 62:32 + 1:20, make 63:52: the Dashboard’s PIC Time.
The left page’s Totals carried forward row reads 16 take-offs and 136 landings (120 of them brought forward).
Good to know
Section titled “Good to know”- The grand total can be more than your total time. It adds columns 1 to 8, so a flight with both PIC and dual received time is counted in both columns. If none of your flights has both, the two match.
- Instrument Flying prints IFR time only.
- The brought-forward row comes from Include prior time in totals (Export → Advanced PDF settings, on by default).
- A filtered export still brings the paper hours forward, a search for one aircraft included. The switch is saved per report, so turning it off for another report doesn’t change HK CAD. See One aircraft’s hours on one page, without your paper logbook.
- Nothing is shared or saved until you tap Share or Save; the back arrow leaves without either.
- Want tenths in the app? Settings → Time → DECIMAL, and Decimal Formats → HKCAD to round with the HKCAD table. For example, 93:52 then reads 94.1 on the Dashboard. See See your hours in tenths, and why 0:50 can be 0.8 or 0.9. The PDF follows: with DECIMAL and the General table, the grand total prints in tenths, for example 93.9 HRS. See Print your logbook in tenths: the PDF follows your Time setting.
Related: Carry over your old logbook · Your Transport Canada logbook: where each hour goes · Sign your logbook PDF · Start each month on a new page · Reprint your logbook from any page · Print a one-page Totals Summary · See your hours in tenths, and why 0:50 can be 0.8 or 0.9 · Print your logbook in tenths: the PDF follows your Time setting