Log a three- or four-pilot sector
On an augmented sector, the pilots take turns in the seats, so a first officer doesn’t log the whole block. Operating Crew on the Total step works out your share.
1. Show Operating Crew (once)
Section titled “1. Show Operating Crew (once)”Account → Pilot Role → the settings button on your role card → Logbook Fields → Total Flight → switch on Operating Crew, go back and tap Save.
2. Enter the times and the crew
Section titled “2. Enter the times and the crew”- Log Flight → New Flight → tap Total in the step bar.
- Type the Block time (for example 12:00), tap Next, type the Air time (11:20), and tap Done.
- Under OPERATING CREW, tap 1, 2, 3 or 4. ADJUST TOTAL is On (Divide total by crew). The split needs both a block and an air time.
3. What you log
Section titled “3. What you log”The LOGGED TIME card shows your share, with the full block struck through when it differs:
| Logbook Role | 3 pilots | 4 pilots |
|---|---|---|
| P1 (captain) | 12:00, the full block | 12:00 |
| P2 (first officer) | 8:27 | 6:40 |
For P2 the app takes the taxi time (block − air, here 0:40), adds 40 minutes for climb and descent, and adds two-thirds of the cruise with three pilots or half of it with four. The cruise is the air time minus those 40 minutes: 0:40 + 0:40 + ⅔ × 10:40 = 8:27.
- To change the role for one flight: Role step → Logbook Role → P2 → Done, then back to Total.
- To log the full block anyway, set ADJUST TOTAL to Off (Log the full total).
- On the Times step, the share goes in as your P2 time, and the route card is tagged SIC.
Good to know
Section titled “Good to know”- Choosing P2 makes the flight PM: your takeoffs and landings are not counted (see Log one flight in the other seat).
- Tapping the selected crew number again clears it.
- Reports print your logged share. To print the whole sector instead, choose As flown under Reports → Export → Advanced PDF settings → REPORT TIME BASIS.
- The Monthly Flight Time chart, an aircraft’s page and map routes keep counting the whole block, so after a shared sector they read more than Flights and the Dashboard. See Block time vs the time you log.
- Long Haul in your role profile can pick the crew size from routes, airport lists and a block-time fallback. A crew number you tap on the flight takes priority, except when Long Haul is on and the route is on its Excluded routes list: that route always counts as two pilots, so you log the full block. See Role profile and auto-fill explained.
Related: Role profile and auto-fill explained · Log one flight in the other seat · Log duty and FDP times · Print your logbook in UTC or local time