Log duty and FDP times
If you fly for an airline or a charter company, you may need to log your duty and flight duty period (FDP) times. FF Logbook works them out from your schedule and your block times.
1. Show the duty fields
Section titled “1. Show the duty fields”- Account → Pilot Role → settings button on your profile → Logbook Fields → Duty.
- Switch on both groups:
- Rest Before Duty / On Duty / Off Duty / Total Duty
- FDP Start / FDP End / Total FDP
- Each group shows its default offsets:
| Setting | Default | Meaning |
|---|---|---|
| On Duty Time Default | 60 | Minutes before STD |
| Off Duty Time Default | 15 | Minutes after IN time |
| FDP Start Time Default | 60 | Minutes before STD |
| FDP End Time Default | 0 | Minutes after IN time |
Change them to match your company. They belong to this role profile, and a blank box goes back to the default. They’re used when you tap a preset, so changing them later doesn’t move times you’ve already logged. 4. Tap Save. 5. Duty counts from your scheduled times, so go back to Flight Basics and switch on STD / STA / Total Scheduled. Tap Save.
2. Log the flight
Section titled “2. Log the flight”- Log Flight → New Flight → Flight step: set the date and the airports, then type the Sched Out (STD) and Sched In (STA). They’re in local time by default and also show in UTC (09:00 → 16:00 UTC).
- Under STD / STA is a Duty card with + Report on the left and + Release on the right. Until STD or STA is in, it reads Enter STD / STA to fill duty from your role. Tap + Report and + Release (or the dot at each end of the line under them):
- Report fills on duty and FDP start from the STD and your default offsets.
- Release fills off duty and FDP end from the STA, until there’s an IN.
- The bar shows the scheduled block and the duty length. Tap a dot again to switch that end off. To change a time, tap it: the Duty step opens.
- Total step: type your actual OUT and IN. Block time works itself out (Block 0:45, from OUT→IN). Off duty and FDP end move with IN, unless you set them by hand.
- Duty step (the fifth step, after Times):
- A position card comes first: where this flight sits in its duty (First of duty, Last of duty or Sector 2 of 3), the duty length, and a strip with rest before, each sector to scale and rest after.
- For your newest flight it asks Last flight of this duty? Yes, end here logs both ends (Start & End on the first sector, End only on a later one). More to come leaves the end open.
- What to log (Start & End, Start only, End only) is folded under the card. Tapping the selected one again clears the four times.
- Below it, DUTY PERIOD shows Calculated from, the four times and the totals.
With STD 09:00, IN 09:50 and the default offsets, Report and Release gave:
| Time | Value | Worked out as |
|---|---|---|
| On duty | 08:00 (15:00 UTC) | STD − 1:00 |
| FDP start | 08:00 | STD − 1:00 |
| Off duty | 10:05 (17:05 UTC) | actual IN + 0:15 |
| FDP end | 09:50 | actual IN |
| Total duty | 2:05 | AUTO |
| Total FDP | 1:50 | AUTO |
- Off duty and FDP end carry a tag: Auto · IN + 0:15 (or Auto · STA + 0:15 (no IN yet)), or Set by hand if you typed the time yourself. If you change IN after setting one by hand, a banner offers Update or Keep (with the time you set).
- Calculated from shows where each time came from: the scheduled date, the STD (or OUT if there’s no STD) and the actual IN (or STA if there’s no IN yet).
- Each card’s Date & time button sets a time and date by hand.
- If you type your own total, AUTO changes to Use calculated, which puts the app’s figure back.
- Rest Before is a duration you type in; the app doesn’t work it out.
- Crew rest stays locked (AUGMENTED ONLY) unless three or more crew operate the flight (Operating Crew on the Total step).
- Whole-duty clocks, folded at the bottom, suggests on duty, FDP start, FDP end and off duty for the whole duty (Not known until it can work them out). Where this flight’s box is empty, Use for this flight fills it.
Limits
Section titled “Limits”If you’ve set up Settings → Duty & FTL → My duty rules, the Duty step shows a duty card under the position card, and it updates as you type the times:
- LATEST ON BLOCKS, with how much time is spare (or over), and the report and release it was worked from.
- View duty details › opens the full calculation. Adjust opens the duty times.
- With My duty rules, the times fold behind Duty clocks (On duty · FDP · Off duty). Tap it to open them.
Without My duty rules there’s no limit card. The only check is then that a period can’t end before it starts or run over 24 hours.
After you save
Section titled “After you save”- Flight Details gets a Duty section, after Crew. With My duty rules set up, it shows the same duty card.
- Reports summary cards can show Total Duty, Total FDP and Rest Before Duty.