Print your logbook in UTC or local time
Your logbook PDF can print each flight’s times in Local time (each airport’s own clock) or in UTC. Airline, EASA and HK CAD pilots often have to present a UTC logbook.
1. See the times as they print
Section titled “1. See the times as they print”Reports → Export, then Export at the top opens PDF Preview. Pinch to zoom in on the From / To times.
In Local, for example, an evening flight from Palo Alto reads KPAO 19:40 → KPAO 21:00 (OUT and IN, the block times), dated 10/06 (6 October).
2. Switch to UTC
Section titled “2. Switch to UTC”- Go back, and scroll down to Advanced PDF settings (tap it to open it if it’s closed).
- Tap REPORT TIME ZONE (Local) and choose UTC.
- Tap Export again.
The same flight now reads 02:40 → 04:00, and its date is 10/07: in UTC it took off after midnight, on 7 October. Palo Alto is UTC−7 in October.
To go back, choose Local in the same place.
Good to know
Section titled “Good to know”- Local uses the departure airport’s clock for OUT and the arrival airport’s clock for IN, and the date follows the departure airport.
- The choice covers every report format, and Save CSV too.
- It also changes the landscape Flights table (it uses your report’s columns), but not the portrait flight cards or how you enter times. For those, see Log a flight in UTC, past midnight and Settings explained.
- Each time the Export screen opens fresh (for example after you restart the app), REPORT TIME ZONE starts from your Account → Settings → Time zone choice. If you always want a UTC logbook, check it before you export.