Block time vs the time you log
Most of the time your block time (gate to gate) and the time you log are the same, so every total agrees. When you log only a share of the block, as P2 on an augmented crew does, the app’s screens split into two groups:
| Adds up the time you log | Adds up block time |
|---|---|
| Flights (header and month rows), Dashboard Total time, your role tiles, the printed logbook (As logged, the default) | The Monthly Flight Time chart, an aircraft’s page, map routes |
1. Before: both read 8:52
Section titled “1. Before: both read 8:52”- Flights: 9 Flights 8:52 Total.
- Reports → Summary → Recent Focus: the Monthly Flight Time chart also reads 8:52, Block time · h · last 12 months. Every flight so far logged its full block.
2. Log a P2 seat on a three-pilot crew
Section titled “2. Log a P2 seat on a three-pilot crew”The example uses a Cessna, but it works the same for any aircraft.
- Dashboard → Log Flight → New Flight. On Role, tap Logbook Role → P2 → Done. The sheet says it’s for this entry only: your role profile stays P1.
- Next. Tap Now for today’s date, then Departure KPAO, Arrival KMRY, Registration N172FF (pick each from the list).
- Next. Type Block 3:00 (type 0300; 300 reads as 30:00: see Type a duration fast, and why ‘50’ means 50 hours) and Air 2:40.
- Under OPERATING CREW, tap 3 (ADJUST TOTAL On). LOGGED TIME drops to 2:20, with 3:00 struck through: your share as P2.
- Tap Complete. Flight Details opens: KPAO → KMRY, 2:20, P2, SIC, and further down TOTAL FLIGHT · Block 3:00.
3. After: 2:20 here, 3:00 there
Section titled “3. After: 2:20 here, 3:00 there”- Dashboard Total time: 93:52 → 96:12 (+2:20).
- Flights: 10 Flights 11:12 Total (+2:20).
- Recent Focus chart: 11:52, This month · 7:32 h (+3:00).
So the flight-time chart answers how long was I in the aircraft; Flights, the Dashboard and your printed logbook answer what goes in my logbook. Other charts add their own field: PIC and SIC Time, for example, adds the logged PIC and SIC time.
Good to know
Section titled “Good to know”- An aircraft’s page and the map’s routes count block too, and prefer your OUT and IN clocks when you’ve typed them. So if you override Block to your operator’s figure, those two still show the clocks’ figure: see Block not what the clocks say? Override it, then hand it back with Auto.
- To print the whole sector instead, Reports → Export has As flown (The whole sector, gate to gate) next to As logged. See Log a three- or four-pilot sector.
- Operating Crew is hidden in a new General Aviation profile: show it under Logbook Fields → Total Flight, then tap Save. (Going back without saving asks Discard changes?)
- To delete a practice flight: on its Flight Details, ⋯ → Delete flight → Delete.
Related: Log a three- or four-pilot sector · Understand flight time totals · What AVG on your flight-time chart means · Role profile and auto-fill explained