Log stops, Tach time and operation type
1. Switch the fields on
Section titled “1. Switch the fields on”Account → Pilot Role → your profile’s settings button → Logbook Fields → Total Flight. Switch on Intermediate Airports, Legs and Tach OUT / IN (Tach counts as two fields, so the bar shows 4 unsaved changes), then Save.
Operation Type is a separate field under Flight Basics. It’s off by default in the General Aviation, Student Pilot and Flight Instructor role profiles. If Log Flight’s Flight step has no Operation, switch on Logbook Fields → Flight Basics → Operation Type too.
2. Operation type
Section titled “2. Operation type”On Log Flight’s Flight step (Log Flight → New Flight), tap Operation and pick what the flight was for: Flight, Training, Position, Ferry, Charter, Reserve, Home Standby, Airport Standby, Non-Flying (or Simulator, which turns the entry into a simulator session). Tap Done on the keyboard bar, then Next · Total Flight at the bottom. That button is hidden behind the keyboard until you tap Done.
For Flight, Training, Ferry and Charter it’s a label: you can filter widgets and report cards by it, or break a widget down By operation type. Position, Reserve, Home Standby, Airport Standby and Non-Flying are entries you didn’t fly as crew, so the app fills in no flight time for them: Total and the role columns stay empty unless you type them. Reserve and the standby types also count as standby for the Time Loop’s duty limits. The flight card shows the type’s first letter as a badge.
3. Tech stops and legs
Section titled “3. Tech stops and legs”- On the Total step, INTERMEDIATE (“Tech stops and turnarounds”) → tap Add a stop…. Tapping it without typing lists your own airports (home base, favourites and recent ones). Pick one; it shows as a chip with ×, and + adds another.
- LEGS · AUTO fills itself: one more than the number of stops (here 2). Type a number to override it (LEGS · MANUAL).
Distance is added up over every leg (departure → stops → arrival), and that’s the distance automatic cross-country compares with your profile’s minimum (see Is it cross-country? Watch the 50 nm rule fill XC). Stops don’t add landings; log those yourself.
4. Block time from the tach
Section titled “4. Block time from the tach”- Under WHERE DOES BLOCK TIME COME FROM?, tap Tach. TACH START and TACH END appear (decimal pad).
- Type the readings: 1234.5 and 1236.0. If this aircraft has an earlier Tach reading, the empty TACH START box offers it: tap the number to fill it in.
- Block shows a suggestion, 1:30 (1.5 hours on the tach). Tap it: Block fills in as MANUAL. On a normal flight Total follows it. On a Position flight, Total stays empty.
Tach differences are rounded to tenths of an hour and turned into hours and minutes with your decimal table (0.1 = 6 minutes by default). Tach never gives air time. The tables are compared in See your hours in tenths, and why 0:50 can be 0.8 or 0.9.